http://homeguides.sfgate.com
If you recently moved to an area with well water and are surprised at the (lack of ) water pressure, don’t worry there are solutions. There are some simple steps you can take to get your pressure up to a respectable standard. This article below can help you out. Just in time for the gardening season!
Things You Will Need
Adjustable wrench
1/2- or 3/8-inch wrench or socket and ratchet
7/16-inch wrench
Tire pressure gauge
Portable air tankWarnings
Do not adjust the cutoff setting above 60 psi, unless the pressure switch supports a higher setting. Adjusting the pressure too high could cause water switch failure and pipe breakage.
Always use caution working with tools, water and electricity. Confirm that the circuit breaker is off and there is no electricity in the system before adjusting the settings on the pressure switch.
