Houzz.au
You can use your air conditioning system to heat your pool. It’s not cheap, and it’s only for the very experienced diy-er or professional, but it can be done.
Steps:
1. Cut the power to the pool filter.
2. Cut out a section of plastic pipe leading from the pool filter using a PVC saw.
3. Thread an adapter into a T-fitting, then insert a sensor well into the adapter.
4. Cut and dry-assemble the PVC pipe and fittings to connect the pool filter to the heat exchanger, and from the heat exchanger to the water pipe leading back to the pool.
5. Once you’re satisfied with the fit of all the parts, glue the pipe and fittings together with PVC primer and cement.
6. Connect the pipe ends to the heat exchanger using threaded unions, not PVC cement.The final steps can’t be done DIY style, you will need first to hire a licensed refrigeration technician to connect the air-conditioner refrigerant lines to the refrigerant lines on the heat exchanger. And recharge refrigerant lines. Then hire a licensed electrician to install the master controller to the exterior wall of the house. The controller acts as an interface between the pool pump, heat exchanger, and air conditioner.
Heat Pool With Air Conditioner
I hope you liked this post! If so, please share our posts with your friends to help us grow!
